Advertisement:

How TO Boot Winxp Fast

Discussion in 'PC Tricks, Tutorials, Softwares And Solutions' started by Babadinho, Nov 22, 2010.

Users Viewing Thread (Users: 0, Guests: 0)

    • Administrator
    • GL Senior Member
    • GL Legend
    • Guru Member

    Babadinho Administrator

    Member Since:
    Sep 19, 2010
    Message Count:
    5,083
    Likes Received:
    448
    Sponsored Links:
    Boot Winxp Fast

    Follow the following steps

    1. Open notepad.exe, type "del c:\windows\prefetch\ntosboot-*.* /q" (without the quotes) & save as "ntosboot.bat" in c:\

    2. From the Start menu, select "Run..." & type "gpedit.msc".

    3. Double click "Windows Settings" under "Computer Configuration" and double click again on "Shutdown" in the right window.

    4. In the new window, click "add", "Browse", locate your "ntosboot.bat" file & click "Open".

    5. Click "OK", "Apply" & "OK" once again to exit.

    6. From the Start menu, select "Run..." & type "devmgmt.msc".

    7. Double click on "IDE ATA/ATAPI controllers"

    8. Right click on "Primary IDE Channel" and select "Properties".

    9. Select the "Advanced Settings" tab then on the device or 1 that doesn't have 'device type' greyed out select 'none' instead of 'autodetect' & click "OK".

    10. Right click on "Secondary IDE channel", select "Properties" and repeat step 9.

    11. Reboot your computer.

    waxilex Member

    Member Since:
    Sep 30, 2010
    Message Count:
    33
    Likes Received:
    0
    you too much tnx man
    • GL Legend
    • Guru Member

    iyKMOra naijakage

    Member Since:
    Aug 20, 2011
    Message Count:
    1,898
    Likes Received:
    29
    hmmmm....

    suleiman Member

    Member Since:
    Feb 15, 2011
    Message Count:
    2
    Likes Received:
    0
    tnx man ! Bt on my Dell lap dsnt hav d step 9 as don in d Secodary IDE Channel. It only hav 'PIO Only' unda Transfer Mode. wt do i do?

Sponsored Links:

Share This Page